It is especially suitable for fine marking of sapphire, quartz, ceramics, glass and other superhard materials.
Email: joy@dumanlaser.com
Item NO. :
DMM-UV-3W/UV-5WPayment :
L/C D/A D/P T/T Western UnionProduct Origin :
ChinaShipping Port :
XiamenLead Time :
15 days3W 5W UV Laser Engraving Machine For Perfume Glass Bottle Marking
Especially suitable for the high-end market of ultra-fine processing, with fine effect and clear and firm marking, such as: 3C industry marking, electronic components, electrical shell marking, packaging bottle marking of food, medicine and other macromolecule materials.
Characteristics of the UV Laser Marking Machine
Ultraviolet laser marking machine has good monochrome, high energy density, good space control and practical control. It has short wavelength, concentrated energy, high resolution, and cold processing characteristics. It can directly destroy the chemical bonds of connecting substances without heating the peripheral. Therefore, it becomes an ideal tool for processing fragile substances, and can punch and cut many kinds of materials.
Ultraviolet laser is flexible and fast in the whole manufacturing process. It does not need absolute dust-free room equipment and high corrosive chemicals. Because most materials can effectively absorb ultraviolet light, ultraviolet laser is very suitable for marking materials such as glass, quartz, polymer and biodegradable polymer materials.
Application Scope
1. It is suitable for fine marking of sapphire, quartz, ceramics, glass and other superhard materials.
2. Suitable for marking related accessories of mobile phone and tablet industry, such as mobile phone cover, touch screen, data line, power supply, connector, etc
3. It is widely used for marking the surface of packaging bottles with macromolecule materials, such as food, medicine, cosmetics, electric wires and so on.
Equipment configuration
Technical Parameters
|
Model |
UV-3W/UV-5W |
|
Average out power |
3W/ 5W |
|
Laser wavelength |
0.355µm |
|
Laser frequency |
10-150khz |
|
Standard marking scope |
100*100mm/150*150mm |
|
Engraving line speed |
<=7000mm/s |
|
The minimum width |
0.01mm |
|
Minimum character |
0.2mm |
|
Repeatability |
±0.002mm |
|
Electricity demand |
220V/60Hz |
|
Power consumption |
500W |
Samples
It is especially suitable for the high-end market of ultra-fine processing, such as food, pharmaceutical packaging material marking, micro-hole drilling, high-speed division of glass materials, and complex pattern cutting of silicon wafers. Email: joy@dumanlaser.com
It is especially suitable for the high-end market of ultra-fine processing, such as food, pharmaceutical packaging material marking, micro-hole drilling, high-speed division of glass materials, and complex pattern cutting of silicon wafers. Email: joy@dumanlaser.com
UV laser marking machine suitable for high-end market for ultra-fine processing, such as mobile phones, chargers, data cables, pharmaceutical packages,cosmetics packages, and polymer materials surface marking. Also it can be used for marking of flexible PCB boards, dicing micro-holes and blind holes for silicon wafers, LCDQA code marking, glassware punching, metal surface marking, plastic buttons, electronic components, gifts, communication equipment, building materials, etc. Email: joy@dumanlaser.com
It is especially suitable for fine marking of sapphire, quartz, ceramics, glass and other superhard materials. Email: joy@dumanlaser.com
It is especially suitable for fine marking of sapphire, quartz, ceramics, glass and other superhard materials. Please send your inquiry to Email: joy@dumanlaser.com
Laser cutting machineis mainly applicable to all kinds of metal sheets: stainless steel, carbon steel, galvanized sheet, copper sheet, aluminum sheet, various alloy sheets, rare metals, etc. CFA series are widely used for cutting and forming of carbon steel, stainless steel, aluminum, copper and other metal materials. Please send your inquiry to Email:joy@dumanlaser.com
Fiber laser marking machine is suitable for most metal materials, such as gold, silver, copper, alloy, aluminum, steel, stainless steel and some non-metal materials, such as plastics (engineering plastics and hard plastics, etc.) electroplating materials, coating materials, spraying materials, plastic rubber, epoxy resin, ceramics, etc. Email: joy@dumanlaser.com
It can meet the requirements of arc, dead edge, return, closed and other complex sheet metal bending. Better automation, less labor and more efficient. Please send your inquiry toEmail: joy@dumanlaser.com
We are online 7*24 hours to answer all your questions
Scan the QR code below to get soon contact
Skype
.jpg)
English
русский
español
한국의
IPv6 network supported