The laser roughen technology is to preheat and strengthen the roll surface by using a high-energy, high repetition rate pulsed laser beam after focusing the negative defocusing light, and form a micro molten pool when the focused focus hits the roll surface.
Please send your inquiry to Email: joy@dumanlaser.com
Item NO. :
DMR-300Payment :
L/C D/A D/P T/T Western UnionProduct Origin :
ChinaShipping Port :
XiamenLead Time :
15 daysPortable Handheld Laser Roughening Machine
The laser texturing machine uses hand-held optical fiber to replace the fixed optical path, which is flexible and convenient. It overcomes the limitation of the workspace, can realize the texturing of various metal surfaces, and can replace sand blasting texturing or shot blasting texturing. It is a new generation of texturing technology.
The laser texturing technology is to preheat and strengthen the roll surface by using a high-energy, high repetition rate pulsed laser beam after focusing the negative defocusing light, and form a micro molten pool when the focused focus hits the roll surface. At the same time, the side blowing device applies auxiliary gas of set pressure and flow to the micro molten pool, so that the molten substances in the molten pool can be stacked to the edge of the molten pool as much as possible according to the specified requirements to form an arc boss (peak number).
The small pits on the surface of the laser textured steel plate are not connected, which is conducive to oil storage and capture of metal debris during the later stamping forming. The oil storage property is good, to prevent stamping scratches, and to ensure the deep drawing property of the steel plate. And the surface of the stamping parts is smooth, and the stamping oil is reduced at the same time.
The laser texturing morphology of the roll surface is uniform and controllable, and the smooth surface accounts for 60% of the whole texturing surface, so that the flatness of the rolled steel plate is high, and the smoothness of the strip steel surface and the freshness after painting are improved. It increases the competitiveness of products for users, and can produce laser mirror steel.
The laser texturing machine can be used for single fiber head or multiple fiber heads. The laser spot energy distribution is uniform, and it has a good spot required for texturing characteristics. It can adapt to various complex texturing, texturing of various devices, and can be organically combined with the manipulator, so texturing is more flexible and convenient. Laser texturing machine is widely used in aviation, aerospace, shipbuilding, weapons, electronic components, sensors, precision machinery and other industries because it is suitable for surface texturing of stainless steel, titanium alloy, aluminum alloy and other materials.
Specificaiton
|
Equipments date |
Laser roughen system |
||
|
Equipment model |
RM-0100 |
RM-0300 |
RM-0500 |
|
Wave length |
1064nm |
||
|
Average power |
100W |
300W |
500W |
|
Power adjust |
10%-100% |
||
|
Laser type |
fibre-detector coupling |
||
|
Laser life |
50,000-60,000 hours |
||
|
Laser class |
IIII level |
||
|
Cable length |
3/5 meters optical fiber |
||
|
Laser transmission |
Scanner Lenses |
||
|
Texturing roughness |
0.5-100 um |
||
|
Texturing size |
50-120 um |
||
|
Software system |
human-computer interface |
||
|
Environmental temp |
5-40 ℃ |
||
|
Environmental humidity |
10-95 % |
||
|
Cooling method |
Air cooling |
Water cooling |
|
|
Equipment voltage |
220V+- 10% |
||
|
Equipment capacity |
1000W |
3000W |
5000W |
|
Equipment weight |
140 KG |
240KG |
320KG |
The laser roughen technology is to preheat and strengthen the roll surface by using a high-energy, high repetition rate pulsed laser beam after focusing the negative defocusing light, and form a micro molten pool when the focused focus hits the roll surface. Please send your inquiry to Email: joy@dumanlaser.com
The laser roughen technology is to preheat and strengthen the roll surface by using a high-energy, high repetition rate pulsed laser beam after focusing the negative defocusing light, and form a micro molten pool when the focused focus hits the roll surface. Please send your inquiry to Email: joy@dumanlaser.com
The laser roughen technology is to preheat and strengthen the roll surface by using a high-energy, high repetition rate pulsed laser beam after focusing the negative defocusing light, and form a micro molten pool when the focused focus hits the roll surface. Please send your inquiry to Email: joy@dumanlaser.com
It's suitable for medium and large sheet metal welding, such as kitchen and bathroom sheet metal, aluminum alloy doors and windows, outdoor railings, mandarin duck hot pot, fuel tank, etc. Please send your inquiry to Email: joy@dumanlaser.com
Fiber laser marking machine is suitable for most metal materials, such as gold, silver, copper, alloy, aluminum, steel, stainless steel and some non-metal materials, such as plastics (engineering plastics and hard plastics, etc.) electroplating materials, coating materials, spraying materials, plastic rubber, epoxy resin, ceramics, etc. Email: joy@dumanlaser.com
It is suitable for plastic auto parts, plastic medical equipment, plastic casings of electronic and electrical products, lighting products, etc. It is especially suitable for the welding of sensors and electronic component casings that require reliable sealing and pressure resistance. Please send your inquiry to Email: joy@dumanlaser.com
Fiber laser marking machine is suitable for most metal materials, such as gold, silver, copper, alloy, aluminum, steel, stainless steel and some non-metal materials, such as plastics (engineering plastics and hard plastics, etc.) electroplating materials, coating materials, spraying materials, plastic rubber, epoxy resin, ceramics, etc. Email: joy@dumanlaser.com
Co2 Laser cutting machine mainly suitable for non-metallic materials such as two-color plate, plexiglass,acrylic, wood board, paper, PU leather, cloth, rubber, marble, granite, ceramic tile, shell, etc. Please send your inquiry to Email: joy@dumanlaser.com
We are online 7*24 hours to answer all your questions
Scan the QR code below to get soon contact
Skype
.jpg)
English
русский
español
한국의
IPv6 network supported