Contact Number

+86 18250801164
  • Home
  • News

  • Laser Cutting & Traditional Cutting, Which One is Better?

Laser Cutting & Traditional Cutting, Which One is Better?

Mar 01, 2022

For thin plate cutting, the use of laser cutting opportunities is better than traditional cutting methods. What are the advantages in terms of processing conditions?

The processing of the fiber laser cutting machine belongs to non-contact processing, which solves the defects such as deformation caused by the mechanical pressure on the workpiece caused by traditional metal processing, and there are no worn instruments and workpieces. It is a cut with a good coating and finish. Low processing cost. Fiber laser cutting machines are faster than other cutting equipment, and the cost of use is cheaper than traditional equipment. Fiber lasers can also reduce the use of mirrors, greatly reducing production and maintenance costs. 

Laser is the use of material excitation to produce light, this light has a strong temperature. When contacting the material, it can quickly melt on the surface of the material to form a punch, and form a cut according to the movement of the alignment and point. Therefore, compared with the traditional cutting method, such a cutting method has a smaller gap, can save most of the materials, and is environmentally friendly. The fiber cutting machine has less waste, low noise, clean and pollution-free, which greatly improves the working environment. 

The highly flexible, manual fiber laser cutting machine can save a lot of money in production costs. On the other hand, the metal laser cutting machine can cut all kinds of complex graphics, just input the drawings into the console, the machine will automatically process the required graphics, saving resources. Since laser cutting has a high dressing capacity and needs to adapt to changes in production capacity, the processing of the workpiece does not require further processing (polishing, deburring, polishing, etc.), from the production point of view, saving labor costs and processing costs, Greatly improved production efficiency.