3D Dynamic marking adopts pre-focusing optical mode and larger X and Y axis deflection lenses, so it can allow larger laser spot, better focusing accuracy and better energy effect. The marking range can be wider.
Please send your inquiry to Email: joy@dumanlaser.com
Item NO. :
DM-M3D02Payment :
L/C D/A D/P T/T Western UnionProduct Origin :
ChinaShipping Port :
XiamenLead Time :
15 days3D Dynamic Laser Engraving Machine for Oversized Marking
It is widely used for stainless steel, copper, aluminum and oxidation plating. It is often used in hardware, daily necessities, electrical appliances, mobile phone shell, precision parts, plastic, PC, ABS and other materials.
1. Non-contact marking: Laser marking is processed to non-mechanical "knife". It can mark any regular or irregular graph. And no internal stress produced during the marking, to protect the accuracy of the work-piece. No corrosion, no "tool" wear, no poison, no pollution. It’s also easy to control and operate by the computer system.
2.Excellent beam quality: small focusing spot, and better processing quality.
3.Low using cost: Power consumption is about 500W, and no consumables.
4.Low stop rate: lifetime of laser source is up to 100,000 hours.
5. Anti-fake: The typical characteristic is to make permanent mark with the laser beam. And the mark is not easy to imitate and change.
Specification
|
Model |
DM-M3D02 |
|
Laser Power |
Optical fiber 20W 30W 50W/CO2 100W/ UV-5W 10W optional |
|
Laser source |
Raycus JPT IPG optional |
|
Laser Type |
Fiber/CO2/UV Laser |
|
Wavelength |
1064nm/10600nm/355nm |
|
Laser Frequency |
50-5000hz |
|
Engraving Speed |
≤7000MM/s |
|
Repeatability |
±0.002mm |
|
Engraving depth |
≤0.3mm |
|
Min.Line Width |
0.01mm |
|
Graphic format supported |
AI, BMP, Dwg, DXP, JPG |
|
Working Style |
XYZ 3D System |
|
Power Source |
AC110V/220V± 10%, 50/60HZ |
|
Power consumption |
≤500W |
|
Processing Area(mm) |
100*100,180*180,300*300,400*400,500*500(Optional) |
|
Optional Spare Parts |
Rotary table, Protection glasses |
|
Cooling Mode |
Air Cooling |
|
Operating temperature |
10ºC-40ºC |
|
Humidity |
5% to 85% (No Condensed ) |
|
Working Environment |
Dry, Clean, Free of dust |
Sample
3D laser marking machine can use high-quality ultraviolet laser source/fiber laser source/CO2 laser source, the spot is extremely small, can be marked on the surface of uneven surface, arc surface and other special-shaped parts, widely used in fine laser processing, high-end market. Please send your inquiry to Email: joy@dumanlaser.com
3D Dynamic marking adopts pre-focusing optical mode and larger X and Y axis deflection lenses, so it can allow larger laser spot, better focusing accuracy and better energy effect. The marking range can be wider. Please send your inquiry to Email: joy@dumanlaser.com
3D Series Splicing engraving is 3D laser marking machine,can use high-quality UV laser source / fiber laser source / CO2 laser source. Apply for large size and deep carving splicing of 600-1000mm. Please send your inquiry to Email: joy@dumanlaser.com
Applicable to but not limited to denim and ready-made fabrics. It is not limited to ready to wear industries such as jeans and jackets. Please send your inquiry to Email: joy@dumanlaser.com
Laser Welding Machine is widely used in mobile phone battery shell, electronic components, mobile communication, precision equipment, hardware products, automotive accessories, glasses, clocks, jewelry, medical equipment, thermal cups, wine pots, kitchens and other industries. Please send your inquiry to Email: joy@dumanlaser.com
This CO2 Laser cutting machine applicable to various materials such as sponge, leather, fabric, non-woven, polypropylene, blended, genuine leather, imitation leather and composite artificial leather. Please send your inquiry to Email: joy@dumanlaser.com
lt can be used for 0.1mm-6mm reinforced and non reinforced glass cutting, such as mobile phone glass cover, car glass cover and camera glass cover. 0.1mm-2mm sapphire glass cutting, such as: mobile phone sapphire cover,camera sapphire glass cover, sapphire lamp post(LED lamp post).LCD glass cutting and other optical lens cutting.processing. Please send your inquiry to Email: joy@dumanlaser.com
It is suitable for welding all kinds of KN95 mask machine welding knives, mask machine welding gear shafts, embossing rollers, embossing shafts, cross-cutting knife sticks, knife pillows, knife molds, folding mask machine molds, rolling die cutters, gear shafts , cam and other standard parts and non-standard parts customized laser quenching equipment. Suitable materials: Cr12MoV, DC53, SKD11, 40Cr, 42CrMo, medium carbon steel and other commonly used die materials. Email: joyhuang@simymachine.com
We are online 7*24 hours to answer all your questions
Scan the QR code below to get soon contact
Skype
.jpg)
English
русский
español
한국의
IPv6 network supported